Translate

2011年12月29日木曜日

Htc chacha ファームアップがきた

Htc chachaの使い勝手がよく、営業用で重宝してます。 MBW-150との連携も抜群ですし、クウォーティー キーボードもいい感じです。しいていえばメモリが すくないです。s-offするのも機械を買わないといけないし だれかクリップかしてください。と思っていたら バージョンアップになりましたのでやったらメモリが増えた うれい、各ソフトのバージョンアップをするだけの 物だと思いますがうれしいです。生きがのびた。

2011年12月22日木曜日

HP Pre3 到着そしてunlockアンロックあんろっく

アメリカの友達経由でHPPre3が到着しました。
Palmは昔からいじっていましたがWebOSは初めて
どうカスタマイズすればいいのか・・・
なんてことはなかったです、先駆者がおられその
方々の情報からアクティベーションが可能にがしかし・・・
WiFiでの使用なので気にならなかったのですが・・・
やっぱりこれってAT&Tのロック物?みたいでした。
50ドル出すのももったいないので下記リンクに
たどり着きがんばってアンロックです。
http://dogber1.blogspot.com/2011/07/unlocker-for-palm-pre-gsm-phones.html
ファームを最新版に書き換えうまくいきました。
おそらくだれでもできると思います。ポイントは下記
5.Calculate the USB passthrough key: go to device info, write down the "Serial Number", and use pre_keygen.py to generate the key from this number. The serial number is also printed on the back of your device and/or underneath the battery.
6.Put your Palm Pre into USB Passthrough mode: enter "#*USBPASS# (#*8727277#) in the dialer application and press the dial icon. If you do not have a valid SIM card installed, start the phone without one, select "emergency call" from the notification at the bottom, delete the number (911, 112 etc.) and enter the code. Another way to make the dialer application pop up is typing "BZ" (#*). A window will appear which asks you to enter the passthrough key. After you've done that, select "Diag" for the "USB PORT 1".
If you have trouble enabling the passthrough mode, install Preware and install the "Enable USB Passthrough" application from Preware.
USB PORT 1をDiagにする為の内容ですがUSB Passthroughと
いうソフトをインストールしてあるなら5.6.の作業はいりません。
又、最後にアンロックコードを入れても反応しない場合は
何度か8.9.10.11を繰り返して下さいいつのまにか解除されているはずです。